Large Insert Sleeve Large Dodge Taper
Product Description
This sleeve is specially made to fit the tapered stud from a Dodge pickup truck or large TeraFlex tie rod end stud. These sleeves can be handy for steering conversions.
The outside diameter is 0.875" and requires a 0.875" smooth hole. once in place and the tie rod is tightened the sleeve wedges into place creating a very tight fit.
The inside hole is tapered at 1-1/2" per foot or 7.153 degrees.
The outside diameter is 0.875" and requires a 0.875" smooth hole. once in place and the tie rod is tightened the sleeve wedges into place creating a very tight fit.
The inside hole is tapered at 1-1/2" per foot or 7.153 degrees.
Additional Information
| Weight | 0.2000 |
| Installation Difficulty | Hard |
| Installation Time | 0 |
| Vehicle type | No |
| Video | No |